[Mr_M//]

Originally Posted by VisualEcho

I just did this last Tuesday as well, for the trip to STL to get my car wrapped. The front bumper cover is freshly painted and I didn't want to take any chances that I might get a chip.

That’s the way to do it

[Mr_M//]

Originally Posted by Bruuuce

looks ready for the winter months

It’s getting really to go under the knife, Installing the fuel pumps fx-180 and the stage 2 turbo.
I need some luck since I have no mechanical skills lol

[///M TOWN]

Originally Posted by Mr_M//

It’s getting really to go under the knife, Installing the fuel pumps fx-180 and the stage 2 turbo.
I need some luck since I have no mechanical skills lol

No laughing matter

Best of luck to you

[Mr_M//]

Originally Posted by ///M TOWN

No laughing matter

Best of luck to you

Patience, determinations and a lot of research will get the job done.
It’s never fun when someone else does the job.

[///M TOWN]

Originally Posted by Mr_M//

Patience, determinations and a lot of research will get the job done.
It’s never fun when someone else does the job.

[VisualEcho]

Originally Posted by Mr_M//

Patience, determinations and a lot of research will get the job done.
It’s never fun when someone else does the job.

This is soooo true.

I've found (having my Lotus in my basement), that if you don't have a time limit (it's not your daily), and you have a comfortable environment, you can do most anything.

[Mr_M//]

Originally Posted by VisualEcho

This is soooo true.

I've found (having my Lotus in my basement), that if you don't have a time limit (it's not your daily), and you have a comfortable environment, you can do most anything.

Thats the way to do it

[TripleU]

Got water in my right pre-LCI tail light (due to my user error when I last replaced a lightbulb and failed to seal it properly). Then when I tried to disassemble the tail light to dry it out, I cracked it.

So I used this as an excuse to upgrade to LCI tail lights.

Turned lemons into lemonade.

[vrooooom]

How do you “seal it properly”? Is this not a simple turn-pull-change-push-turn? Or has BMW just made that complicated again?

[-Eidos]

Originally Posted by Matt Devo

with the CDV delete, AS short shifter (stock height, 20% reduction), and the trans mounts, the entire drivetrain just feels perfect now. super happy.

It's a wonderful combo

[neonbrown]

Installed ohlins, vorschlag cp, and hotchkis front sway bar.

Before it handled good, now it handle real good.

Better photos to come

[Matt Devo]

installed the Rennline magnetic phone mount. Not sure it's $40 better than the vent clip from Amazon, but it's August in Texas and I need both vents working, so it is what it is.

One note is that I did apply a bit of 3M double sided tape to the outside edge of the mount, since it's only held in at the top by a single screw, and it was apparent that the mount had a little bit of play that could become annoying when driving due to NVH, or just from repeated removal of the phone from the mount

[vrooooom]

Installed the fastest upgrade ever in a BMW M2. less than 5 mins! +10 whp!

[PsychCA]

Originally Posted by Matt Devo

installed the Rennline magnetic phone mount. Not sure it's $40 better than the vent clip from Amazon, but it's August in Texas and I need both vents working, so it is what it is.

One note is that I did apply a bit of 3M double sided tape to the outside edge of the mount, since it's only held in at the top by a single screw, and it was apparent that the mount had a little bit of play that could become annoying when driving due to NVH, or just from repeated removal of the phone from the mount

Hey,

Would you have the link as I can't find it on their website ?

Thanks

[vrooooom]

Originally Posted by PsychCA

Hey,

Would you have the link as I can't find it on their website ?

Thanks

https://www.rennline.com/BMW-M2-Exac...tinfo/PM01.58/

[PsychCA]

Originally Posted by vrooooom

https://www.rennline.com/BMW-M2-Exac...tinfo/PM01.58/

Thanks a lot.
I browsed through BMW products and could not find anything for 2 series.

[Matt Devo]

Originally Posted by PsychCA

Hey,

Would you have the link as I can't find it on their website ?

Thanks

https://www.rennline.com/BMW-M2-Exac...tinfo/PM01.58/

[SteveOS]

Bought one! Well, technically I bought it a little over a month ago. Sold my 2011 E92 to get it. Plenty of mods to come, but I did get 20% tint all around.

https://www.m3post.com/forums/showpo...ostcount=15907

[neonbrown]

got these eyelids while i think about getting a lip..

I wanted some carbon in the front for the mean time, and also think its a subtle way to reduce some of the white from the overall aesthetic

[///M TOWN]

I drove 26 miles round trip to grab some tasty food I was craving

California Burger with Fries and a Chocolate Shake

Worth every mile ‼️

[iam2slow]

Originally Posted by SteveOS

Bought one! Well, technically I bought it a little over a month ago. Sold my 2011 E92 to get it. Plenty of mods to come, but I did get 20% tint all around.

https://www.m3post.com/forums/showpo...ostcount=15907

How do the two compare? Would like to hear your personal thoughts/experience on how they drive

[SteveOS]

Originally Posted by iam2slow

How do the two compare? Would like to hear your personal thoughts/experience on how they drive

Absolutely loved the E92, but the low end torque just wasn't there. The difference between the M2 is night and day. Exhaust note was lovely on the E92 with the M performance, the upper rev range was intoxicating. I have stock on the M2, but my Fabspeed downpipe is on the way. Just basing it off of comments I'll probably be happy with it.

Both are VERY fun to drive, but my extended warranty ran out on the E92 and I know rod bearings and TA's were something I'd have to do down the road. It was an easy decision to move on. Especially after the test drive LOL.