[BMWTurbo]

Hey everyone,

Got my M2 MPE installed today. Went with CYBA tips. Awesome quality and finish with brushed look. But I am trying to tighten and they seem loose and like they are gonna go flying off. I'm not super techy. I see the three bolts and as I tighten them I can still move the tip around with my hands and I feel like they are at max tightness. Any suggestions? Thanks

[BMWTurbo]

Hmm am I supposed to tighten the outer bolt or the inside star based screw?

[cecaa850]

I would think that the nut is there to supply threads for the allen set screw however I haven't seen a set of those tips in person.


You've tightened the set screws and they're still loose?

[detroitm2]

Loosen the nut, tighten the inner bolt, tighten the nut.

The nut is there to lock the inner bolt in place.

[BMWTurbo]

Ahh I see! Thank you!

[BMWTurbo]

What do you guys think?

[M Fifty]

Does this mean you have a set of the genuine MPE tips going spare?

[MdMcoupe]

Do you have any cold start rattles with the Cyba tips?
Just wondering if the rattle is coming from the M performance tips.
Thanks

[BMWTurbo]

No genuine tips. Could accept the cost as I feel they are overpriced

[BMWTurbo]

Checked the rattle today. Yep. Cold start rattle is there

[HTTP 410]

I've had my MPE w/OEM carbon fiber tips since last year on my '18 and the local dealer has finally given up on trying to fix the cold start rattle. It's embarrassing. Such a shame...

[Nezil]

Cyba tips might be an option, but I didn't like that you could see the pipe inside the tip.

The other option, that many, including me have done, is to get the M Performance knock offs from eBay for about $200 for a set of carbon tips that look nearly identical.