10-24-2019, 03:04 AM | #1 |
Private First Class
40
Rep 199
Posts |
Dinan midpipe rattling?
I just recently installed the Dinan resonater delete. I had the axle back on before I out this on. I noticed that it was really hard to get into the OEM pipe and that the axle back started to sag a bit more. When installing the midpipe I removed the adaptor piece that was connected to the axle back. Should I have left that on? Also on cold starts and low rpms, I can hear the midpipe rattling on the chassis brace. How do I fix this?
|
10-24-2019, 08:54 AM | #2 |
Lieutenant Colonel
470
Rep 1,657
Posts
Drives: 2022 WRX World Rally Blue
Join Date: Apr 2009
Location: Somewhere
|
I just looked at the directions. I see nothing about removing an adapter plate. I'm also guessing you supported your muffler and pipe so they were level and fully seated? Also make sure you torque your bots down to the proper values. Never do the "that feels right" approach.
Also make sure you have enough clearance between your car and the exhaust components. I also like to check all my fasteners after a couple of heat cycles.
__________________
Rick
|
Appreciate
0
|
10-27-2019, 04:01 PM | #3 | |
First Lieutenant
462
Rep 290
Posts
Drives: 2023 BMW M2
Join Date: May 2019
Location: Bay Area
|
Quote:
|
|
Appreciate
0
|
10-30-2019, 04:22 PM | #4 |
BimmerPost Supporting Vendor
24055
Rep 190,575
Posts |
Dont recall any issues with this product either
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|