[JTK_Broom]

hello.

I DIY an M performance steering wheel with an LCD, but there is a slight problem.

There was no harness or control unit.
So I made the harness myself and ordered the control unit through eBay.

The control unit is as follows
"Genuine BMW M Performance Electric Steering Wheel V2 Control Unit 61352212797"

The problem I currently have is as follows:
Power and all settings menus are accessible.

However, information about rpm and temperature is not available.
So the temperature is displayed at -48C and the rpm is 0.

I want to solve this problem.
I really need your experience and advice.

My vehicle is a 17 year F87 Org.

[Got f1?]

Originally Posted by JTK_Broom

hello.

I DIY an M performance steering wheel with an LCD, but there is a slight problem.

There was no harness or control unit.
So I made the harness myself and ordered the control unit through eBay.

The control unit is as follows
"Genuine BMW M Performance Electric Steering Wheel V2 Control Unit 61352212797"

The problem I currently have is as follows:
Power and all settings menus are accessible.

However, information about rpm and temperature is not available.
So the temperature is displayed at -48C and the rpm is 0.

I want to solve this problem.
I really need your experience and advice.

My vehicle is a 17 year F87 Org.

Hard to diagnose remotely. Make sure wires lead to the FEM module locations correctly in the passenger right footwell. Not sure if it is wiring issue or bad module.