[HyeWarrior]

Curious if this would fit my car? Or would it be too much of a hassle

[AlpinewhiteM2C]

I can't make out the offset of the first wheel but assuming 19x9 2x offset, the specs on paper is fine but it's the caliper clearance that's key in the front. The 2NH calipers require a lot of space; even the OEM 788m is a tight fit.

The rear appears to be 19x10.5 26 offset. That will have a lot of poke on the outside and will most likely cause rubbing.

[HyeWarrior]

Originally Posted by AlpinewhiteM2C

I can't make out the offset of the first wheel but assuming 19x9 2x offset, the specs on paper is fine but it's the caliper clearance that's key in the front. The 2NH calipers require a lot of space; even the OEM 788m is a tight fit.

The rear appears to be 19x10.5 26 offset. That will have a lot of poke on the outside and will most likely cause rubbing.

That’s what I was afraid of.

Are there issues with other 19’s not clearing the brakes? I assumed any 19” wheel should be safe to clear

[AlpinewhiteM2C]

Originally Posted by HyeWarrior

That’s what I was afraid of.

Are there issues with other 19’s not clearing the brakes? I assumed any 19” wheel should be safe to clear

Not all 19" wheels will automatically clear the 2NH brake calipers. See this thread about how 19" TE37s doesn't clear 2NH brake calipers: https://f87.bimmerpost.com/forums/sh....php?t=1717915

[Van1]

What’s this wheel intended to fit? What is the bolt pattern spacing? What is the hub bore diameter?