TC Kline Racing Camber Plates F87 M2

HP Autosport · 07-07-2022, 01:49 PM

bump

HP Autosport · 07-29-2022, 11:14 AM

bump

HP Autosport · 08-11-2022, 11:13 PM

bump

HP Autosport · 08-26-2022, 11:17 PM

bump

HP Autosport · 09-11-2022, 11:08 PM

bump

ZL9M2 · 09-12-2022, 08:00 AM

Make sure you loctite the top nut on these or it will slowly loosen.

HP Autosport · 09-12-2022, 04:02 PM

Quote:

Originally Posted by ZL9M2

Make sure you loctite the top nut on these or it will slowly loosen.

Always a good idea with any suspension component. Witness mark so you can easily check later as well.

HP Autosport · 09-23-2022, 12:02 PM

bump

HP Autosport · 10-11-2022, 09:25 PM

bump

HP Autosport · 11-15-2022, 03:26 PM

bump

HP Autosport · 12-07-2022, 02:37 PM

bump

HP Autosport · 12-20-2022, 05:25 PM

bump

HP Autosport · 01-06-2023, 05:52 PM

bump

HP Autosport · 02-05-2023, 08:55 PM

bump

HP Autosport · 03-03-2023, 02:23 PM

bump

HP Autosport · 03-26-2023, 05:40 PM

bump

HP Autosport · 04-11-2023, 11:31 AM

bump

ZL9M2 · 04-11-2023, 12:41 PM

Quote:

Originally Posted by HP Autosport

Always a good idea with any suspension component. Witness mark so you can easily check later as well.

Is there a "taller" top nut available for these Kline units? Could the lower collar area just be machined differently so that the hex area sat higher? I only have one box end wrench that is able to "grab" that top nut to tighten it. The nut sits low so that there is not a significant area available to mate with a wrench. I may try to find a few washers to fit underneath those top nuts. . I've also had these top nuts loosen..

HP Autosport · 04-11-2023, 07:47 PM

Quote:

Originally Posted by ZL9M2

Is there a "taller" top nut available for these Kline units? Could the lower collar area just be machined differently so that the hex area sat higher? I only have one box end wrench that is able to "grab" that top nut to tighten it. The nut sits low so that there is not a significant area available to mate with a wrench. I may try to find a few washers to fit underneath those top nuts. . I've also had these top nuts loosen..

They are already a long reach style nut. Typically, installation on Koni and MCS is not an issue. What are you installing them on? A little blue loctite is recommended for the top nuts.

Anything custom you will have to contact TCKR for custom made hardware.

ZL9M2 · 04-11-2023, 08:34 PM

Quote:

Originally Posted by HP Autosport

They are already a long reach style nut. Typically, installation on Koni and MCS is not an issue. What are you installing them on? A little blue loctite is recommended for the top nuts.

Anything custom you will have to contact TCKR for custom made hardware.

This is on a 2017 ZL9 Performance Package m2 with the M Performance suspension. You can barely grab the top of that nut. Another 3..5 mm in height would be perfect.

HP Autosport · 04-12-2023, 11:44 AM

Quote:

Originally Posted by ZL9M2

This is on a 2017 ZL9 Performance Package m2 with the M Performance suspension. You can barely grab the top of that nut. Another 3..5 mm in height would be perfect.

M Performance/KW isn't one of the fitments. If you somehow got it to work and need special hardware, contact TC Kline Racing.

07-07-2022, 01:49 PM	#177
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

07-29-2022, 11:14 AM	#178
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

08-11-2022, 11:13 PM	#179
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

08-26-2022, 11:17 PM	#180
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

09-11-2022, 11:08 PM	#181
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

09-12-2022, 08:00 AM	#182
ZL9M2 Second Lieutenant 360 Rep 294 Posts Drives: '17 M2 ZL9-'20 M2CS-'68 1600 Join Date: Jul 2017 Location: Wisconsin iTrader: (1)	Make sure you loctite the top nut on these or it will slowly loosen.
	Appreciate 0 Quote

09-23-2022, 12:02 PM	#184
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

10-11-2022, 09:25 PM	#185
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

11-15-2022, 03:26 PM	#186
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

12-07-2022, 02:37 PM	#187
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

12-20-2022, 05:25 PM	#188
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

01-06-2023, 05:52 PM	#189
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

02-05-2023, 08:55 PM	#190
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

03-03-2023, 02:23 PM	#191
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

03-26-2023, 05:40 PM	#192
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote

04-11-2023, 11:31 AM	#193
HP Autosport BimmerPost Supporting Vendor 3814 Rep 54,307 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	bump
	Appreciate 0 Quote