12-19-2019, 11:12 AM | #1 |
Private
17
Rep 58
Posts |
'DSC Off' Light
I just finished installing the red M1/M2 buttons and everything went fine, until I started the car and the DSC Off light came on and won't go away.
I'm aware that after disconnecting and reconnecting the battery, the iDrive system will prompt me to set up the date and time, which I did. I'm not sure why this DSC light came on and won't go away. Anyone know what to do and how to fix it? |
12-19-2019, 11:26 AM | #2 | |
Second Lieutenant
348
Rep 244
Posts
Drives: '20 M2C, '10 535ixT, '91 M5
Join Date: Apr 2019
Location: Chicagoland
iTrader: (0)
Garage List 2023 X5 45e [0.00]
2015 LR4 HSE Lux + HD [0.00] 1965 Shelby Cobra 4 ... [0.00] 2020 M2C [0.00] 1991 M5 [0.00] 2010 535ixT [0.00] |
Quote:
|
|
Appreciate
1
HSM2C17.00 |
12-19-2019, 11:43 AM | #3 | |
Private First Class
117
Rep 178
Posts
Drives: 2020 M2C, 2018 X3M40i, 765RS
Join Date: Sep 2014
Location: Santa Cruz, CA
|
Quote:
|
|
Appreciate
1
HSM2C17.00 |
12-19-2019, 12:05 PM | #4 |
Private
17
Rep 58
Posts |
Cannondale900, atomsapple
Thanks guys, I was worried that I might have pinched something by mistake when reassembling everything, even though it was all straight forward. After reading both replies, I started the car, put it in reverse to take it out of the driveway and the DSC Off light went away immediately and stayed off. Thanks again for the helpful tip, really appreciate it. |
Appreciate
2
Cannondale900348.00 atomsapple117.00 |
Post Reply |
Bookmarks |
|
|