[AlpsRider]

😱

[lax01]

Originally Posted by Killed by Death

Went through a slap and swirl

Owner abuse! Delete this so you don't have to explain to a future buyer!

[tonybrown]

i just bought my second audi and thought it better i joined this forum, cuz i think it may be helpfull to me. thanks

[cbmmm3]

peeked under the cover...….baby still sleeping.

[detroitm2]

Originally Posted by Killed by Death

Went through a slap and swirl

Forgiven only because you're listening to XM Turbo. 🤘

[Killed by Death]

Originally Posted by cbmmm3

peeked under the cover...….baby still sleeping.

ouch, gonna be around the 70's here this week

[3t3p]

Originally Posted by detroitm2

Installed Myself:
- Dinan Intake

Having Installed:
- FTP Charge Pipe
- FTP Boost Pipe
- FTP Turbo Inlet Pipe
- CSF Intercooler
- GFB DV+

Waiting to Install:
- Perl Carbon Front Lip
- Perl Carbon Side Skirts
- Carbon Side Vents
- Carbon Fangs
- PedalHaus Pedals + Dead pedal
- Rewire AIM Solo 2 DL Connector
- Schroth Quickfit Pro Harnesses

How do you like the car so far before stage two BM3 flash? i.e. just the following:


Having Installed:
- FTP Charge Pipe
- FTP Boost Pipe
- FTP Turbo Inlet Pipe
- CSF Intercooler
- GFB DV+

Cheers

[detroitm2]

Originally Posted by 3t3p

How do you like the car so far before stage two BM3 flash? i.e. just the following:


Having Installed:
- FTP Charge Pipe
- FTP Boost Pipe
- FTP Turbo Inlet Pipe
- CSF Intercooler
- GFB DV+

Cheers

So I had the parts installed a couple weeks ago, and didn't drive much before I flashed staged 2 OTS map. It definitely felt more responsive and more power through the range.

The stage 2 tune had a pretty big effect on everything across the board.

I'll probably be running the Racegas stage 2 tune on track days. Mixing 93 with some boostane to get 100+ octane. Will report back on that once I get her on the track next month. From what I understand, it's a 15-20 HP bump on 100 octane.

[detroitm2]

Built a custom BM3 agent device and made a semi permanent install in my car. Decided to install it in the trunk next to the battery to keep it out of the way. Plus its super easy to tap an ignition fuse from there.

Here's a breakdown of parts for this build if anyone is interested.

- raspberry pi 3b
- case for RP
- 16GB Micro SD card
- generic OBD extension (about 1 ft)
- OBD to Ethernet adapter (Like an ENET cable but with a female RJ45 jack on it)
- 12ft ethernet cable
- 12v hardwire to micro usb

The OBD extension has a right angle plug on it, so I was able to fish the other end up into the access panel on the driver side near the dash. From there, I connected the OBD to ethernet adapter, and then an ethernet cable. I routed the ethernet cable along the driver side door trim, into the trunk.

To power the raspberry pi, I connected it to a tapped fuse that is turned on/off with the ignition, so it won't drain my battery when the car is off.

The raspberry pi itself is velcroed next to the battery, easily accessible if I need to remove it to reflash it, or for any other reason.

I also modified the BM3 image slightly to use my own wifi hotspot SSID and passphrase so I did not have to make a new one called "bootmod3"

While doing all this wiring, I also finished up the relay box connection for my aim solo. I needed to resolder a new plug on the side that connects to my car. No pics of this, but if someone's interested I can post some up.

[BigJRocksIt]

Got my MP suspension installed and lowered 15mm. Super happy with the results.

[jenks.chris106]

Installed mperformance cf diffuser

[Mikegm2]

Swapped the Conti’s out for PS4’s

['74Turbo]

Listed mine for sale <sad face>

[chief1richard]

Tacking mine to Lime Rock.

[JMAC5150]

Installed the Lightweight front lip spoiler that I ordered from EAS. The install was a PIA.

[dtmurf]

Originally Posted by '74Turbo

Listed mine for sale <sad face>

Wow! First post is "listed mine for sale" Why are you selling it?

[jenks.chris106]

Mperformance cf mirror caps and new windshield!

[LFaist]

It's under lockdown in the Garage avoiding the rain and virus.

[Nezil]

Fitted the M2C / M3 / M4 Aluminium strut brace, including the required M2C / M3 / M4 strut top hats, and the M3 / M4 strut reinforcement rings.

2.5 hours work start to finish, really not that difficult to do, and makes an enormous difference to comfort and steering feel.

CFRP brace is on the way, and will be fitted once it arrives. Hoping for even more of an improvement once that is fitted.

[AndrewC1989]

Originally Posted by Nezil

Fitted the M2C / M3 / M4 Aluminium strut brace, including the required M2C / M3 / M4 strut top hats, and the M3 / M4 strut reinforcement rings.

2.5 hours work start to finish, really not that difficult to do, and makes an enormous difference to comfort and steering feel.

CFRP brace is on the way, and will be fitted once it arrives. Hoping for even more of an improvement once that is fitted.

Post some pics once it's all done!

[Dr.Deep]

Prepared for the warm weather again

[AndrewC1989]

Dropped her off at the eye doctor

Alex@ONEighty