Apex wheels and tires for the track

Peterometer · 08-22-2021, 11:42 AM

19X10.5" ET22 APEX EC-7 REAR
19X9.5" ET22 APEX EC-7 FRONT

The wheels are RE71R's 255/35 19 front and 265/35/19 rear.

The rears do stick out a bit

M3R1 · 08-22-2021, 01:35 PM

If possible, can you take a few more pics? Perhaps looking down over the front and rear wheel wells?

Thanks!

chris719 · 08-22-2021, 08:54 PM

Quote:

Originally Posted by stevestevesteve

19X10.5" ET22 APEX EC-7 REAR
19X9.5" ET22 APEX EC-7 FRONT

The wheels are RE71R's 255/35 19 front and 265/35/19 rear.

Are these anthracite finish?

slicer · 08-23-2021, 01:33 PM

That is an e9x rear spec. I would not run that on track if you like your fenders.

Peterometer · 08-23-2021, 03:36 PM

Quote:

That is an e9x rear spec. I would not run that on track if you like your fenders.

This is correct. Wrong wheels for the car, although the fronts will work.

CarJunkie · 08-23-2021, 06:19 PM

Quote:

Originally Posted by slicer

That is an e9x rear spec. I would not run that on track if you like your fenders.

Agreed. That is going to rub for sure!

gmhl10 · 08-23-2021, 06:38 PM

Interesting you went with that offset, especially since APEX says right on their website what sizes are correct for F87.

https://support.apexraceparts.com/hc...-Fitment-Guide

You could've run a 20-30mm wider tire in the rear without as much going past the fender like right now.

08-22-2021, 11:42 AM	#1
Peterometer Private First Class 215 Rep 155 Posts Drives: 2020 M2CS Join Date: Feb 2021 Location: Denver iTrader: (0)	Apex wheels and tires for the track 19X10.5" ET22 APEX EC-7 REAR 19X9.5" ET22 APEX EC-7 FRONT The wheels are RE71R's 255/35 19 front and 265/35/19 rear. The rears do stick out a bit
	Appreciate 2 kyrocks1070.50 chris7197334.00 Tweet Quote

08-22-2021, 01:35 PM	#2
M3R1 Colonel 2169 Rep 2,353 Posts Drives: ///M2cs Join Date: Oct 2008 Location: NJ iTrader: (5)	If possible, can you take a few more pics? Perhaps looking down over the front and rear wheel wells? Thanks! __________________ BSM ///M2cs, 6spd
	Appreciate 0 Quote

08-23-2021, 01:33 PM	#4
slicer Major General 2739 Rep 6,734 Posts Drives: 'E46 M3 Race Car, '23 X7 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	That is an e9x rear spec. I would not run that on track if you like your fenders. __________________ '23 X7 '04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M
	Appreciate 1 chris7197334.00 Quote

08-23-2021, 06:38 PM	#7
gmhl10 First Lieutenant 385 Rep 367 Posts Drives: Not a M2 CS Join Date: Feb 2020 Location: Austin, TX iTrader: (0)	Interesting you went with that offset, especially since APEX says right on their website what sizes are correct for F87. https://support.apexraceparts.com/hc...-Fitment-Guide You could've run a 20-30mm wider tire in the rear without as much going past the fender like right now.
	Appreciate 0 Quote