02-19-2020, 12:01 PM | #2 |
M2 comp
59
Rep 72
Posts |
I fitted the M performance front splitter to mine.
It uses the original bumper fixings along the back of the splitter, the two recessed holes require plastic rivets after two holes are drilled into the bumper. Use the supplied sandpaper and scratch up the carbonfibre where the Betalink goes, it should bond to the paintwork after using the supplied cleaner. |
Appreciate
1
JonD203.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|