02-05-2020, 09:29 PM | #1 |
Captain
554
Rep 797
Posts |
Does stock M2 exhaust fit in the car?
Hi all,
I'm soon to be upgrading my stock m2 exhaust to the Remus system. I am curious for those who have upgraded their stock system, does it fit inside the car with the seats down for the drive home? I know it is one large unit, including the muffler, resonator, and piping. Trying to figure out if I need to coordinate another larger car to bring it back. Thanks! |
02-05-2020, 09:54 PM | #2 |
First Lieutenant
229
Rep 328
Posts |
Do you mind cutting it into three to four pieces? If not, it is impossible to fit in the car, the muffler itself will take up the entire trunk
|
02-05-2020, 11:56 PM | #4 |
Captain
554
Rep 797
Posts |
Thanks, sounds like I'll either need to enlist the help of a friend, or cut it. I suppose to reinstall it any good muffler shop could weld it where it was cut?
|
Appreciate
0
|
02-06-2020, 05:51 AM | #5 |
Second Lieutenant
98
Rep 235
Posts |
I cut mine at a factory breakpoint and was able to fit the two pieces it in the trunk with seats down
__________________
Current - 2018 M2 | VRSF Chargepipe | VRSF Catless Downpipe | Dinan Catback | Turner Motorsports Intake
Previous - 2016 340i M-Sport | AWE Tuning Touring Edition Exhaust w/ Non-Resonated Performance Mid Pipe | Agency Power Intake | Active Autowerke Activ-8 | VRSF Catless Downpipe |
Appreciate
1
bmxcamel554.00 |
02-06-2020, 11:18 AM | #6 |
New Member
2
Rep 29
Posts |
You can put the whole exhaust through the trunk with the back seats down without a problem. I had the MPE fit through the whole car once but that you had to go through the door. You can definitely slide it through the back, just the pipe will be on your armrest.
|
Appreciate
0
|
02-06-2020, 11:25 AM | #7 |
Lieutenant Colonel
1717
Rep 1,899
Posts |
With The MPE it isn't the full stock cat back exhaust. It's cut already.
|
Appreciate
0
|
02-06-2020, 11:50 AM | #9 |
Brigadier General
10931
Rep 4,551
Posts
Drives: 2015 328d xDrive
Join Date: Aug 2010
Location: NoVA
|
If you can't get it transported in one big piece I would cut it where the mounting points for an MPE/Dinan res delete would go. This way it can be clamped back together using either one of those popular systems if you decide to sell or reinstall.
http://files.dinancars.com/webresour...97aa147118.pdf |
Appreciate
2
NYC Bimmer259.50 bmxcamel554.00 |
02-21-2020, 12:37 PM | #11 |
Captain
482
Rep 757
Posts
Drives: M2
Join Date: Nov 2016
Location: PNW
|
There is no way it will fit inside the car. It will not fit in an Audi Q5 either! BWM have helped out and marked where it should be cut and I agree, any good muffler shop will be able to re-weld it back to together.
Another issue is storage. It's too big to put just about anywhere so you need to think about that too. ...however, you are going to love the Remus!
__________________
'17 M2 DCT Long Beach Blue
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|