[TeeeeeeDub]

Received Oleg's 2NH brackets last week. Beautiful pieces! I contacted Paragon on Monday 12/2 and was given a Black Friday discount and was told that it would take up to 2 weeks. Today is 12/4 and they arrived on my step. Great customer service from both Track/S and Paragon! Will be installing them soon!

[Eric Tsai]

Track/S

PM already. Please check.
Thanks.

[Chillisalt]

Originally Posted by Track/S

Good news

Legend! thanks for that!

[Track/S]

Originally Posted by thrilla

What are the wheel specs on the TE37? I think this picture just pushed me to get these brackets.
Track/S how do I order?

18x9 ET23

[F87_Vince]

Track/S Could you PM me regarding a set of custom brake brackets to fit 18s with 2NH brakes? Unfortunately haven't posted enough to send a PM yet.

[Track/S]

Originally Posted by F87_Vince

Track/S Could you PM me regarding a set of custom brake brackets to fit 18s with 2NH brakes? Unfortunately haven't posted enough to send a PM yet.

Shoot me a mail Prodrive03021982@gmail.com.

[F87_Vince]

Originally Posted by Track/S

Shoot me a mail Prodrive03021982@gmail.com.

Sounds good just sent you an email. Thank you.

[e46IX]

Can you run these brackets and fit the oem 380mm rotors with the 2NH calipers? i dont track my car i just want an oem setup with a bit less rotating mass on the front axle and ability to run 18's.

[TeeeeeeDub]

Originally Posted by e46IX

Can you run these brackets and fit the oem 380mm rotors with the 2NH calipers? i dont track my car i just want an oem setup with a bit less rotating mass on the front axle and ability to run 18's.

Are you referring to the OEM blue caliper 380 rotors? if so, you cannot use them as they are only 30mm in thickness. You need a 380x36mm rotor that come on G8x cars but they are different PCD so that's where custom rotors come into play from Paragon and Girodisc.

[E93M3MW]

Track/S , or anybody else:

Do we know if the stock F8X 513M alloy (18x9J ET29) fits over the 2NH caliper with the adapter and 380 rotors?

[Track/S]

Originally Posted by E93M3MW

Track/S , or anybody else:

Do we know if the stock F8X 513M alloy (18x9J ET29) fits over the 2NH caliper with the adapter and 380 rotors?

Yes, i have same wheels

[E93M3MW]

Originally Posted by Track/S

Yes, i have same wheels

I thought you were running the M2 CS wheels with 10.5J all round?

[Track/S]

Originally Posted by E93M3MW

I thought you were running the M2 CS wheels with 10.5J all round?

Yes, they are same 513M but 10.5 square.

[E93M3MW]

Thanks, looking forward to getting the 18s on now!

[FaRKle!]

Originally Posted by E93M3MW

Track/S , or anybody else:

Do we know if the stock F8X 513M alloy (18x9J ET29) fits over the 2NH caliper with the adapter and 380 rotors?

Originally Posted by Track/S

Yes, they are same 513M but 10.5 square.

Careful, 513m 18x9 have less clearance than other 18" wheels. My 513m 18x9 don't clear the AP 9668 like all my other 18" wheels do without a 12-15mm spacer due to the inner diameter of the barrel being smaller near the face of the wheel.

[TeeeeeeDub]

Originally Posted by FaRKle!

Careful, 513m 18x9 have less clearance than other 18" wheels. My 513m 18x9 don't clear the AP 9668 like all my other 18" wheels do without a 12-15mm spacer due to the inner diameter of the barrel being smaller near the face of the wheel.

Does the AP kit have more clearance than these brackets, 2NH and 380mm rotors?

[Track/S]

Originally Posted by FaRKle!

Careful, 513m 18x9 have less clearance than other 18" wheels. My 513m 18x9 don't clear the AP 9668 like all my other 18" wheels do without a 12-15mm spacer due to the inner diameter of the barrel being smaller near the face of the wheel.

Any pics to see it?

[E93M3MW]

Originally Posted by FaRKle!

Careful, 513m 18x9 have less clearance than other 18" wheels. My 513m 18x9 don't clear the AP 9668 like all my other 18" wheels do without a 12-15mm spacer due to the inner diameter of the barrel being smaller near the face of the wheel.

This is what i was worried about. That the 18x9J may have less clearance than the 10.5J.

Track/S have you fit an 18x9J successfully over the 2NH caliper?

[FaRKle!]

Originally Posted by Track/S

Any pics to see it?

I didn't take a pic of it, but in the below pic (not my pic btw), the part of the barrel the wheel weights are on is what's tighter/protrudes further inwards than other 18" wheels and was making contact with the 9668 calipers. I remember trying my 5, 7.5, and 10mm spacers and it still didn't clear, so I put on my 15mm spacers and it was fine.

[Track/S]

Originally Posted by E93M3MW

This is what i was worried about. That the 18x9J may have less clearance than the 10.5J.

Track/S have you fit an 18x9J successfully over the 2NH caliper?

I'll have to do some testing, I have a friend who has those tires, I'll ask him for one to try

Originally Posted by FaRKle!

I didn't take a pic of it, but in the below pic (not my pic btw), the part of the barrel the wheel weights are on is what's tighter/protrudes further inwards than other 18" wheels and was making contact with the 9668 calipers. I remember trying my 5, 7.5, and 10mm spacers and it still didn't clear, so I put on my 15mm spacers and it was fine.

I see that this area is narrower!

[Westersund]

Originally Posted by Track/S

I'll have to do some testing, I have a friend who has those tires, I'll ask him for one to try



I see that this area is narrower!

How does the M2 CS Racing wheels look on the inside? The 18x10.5" square ones. How much clearance do you have with the 2NH calipers? Looking to buy a set of M2 CS Racing wheels as my current track wheels , König Hypergram 18x10" ET 25, didn't clear the new G8X M calipers.

[Track/S]

Originally Posted by Westersund

How does the M2 CS Racing wheels look on the inside? The 18x10.5" square ones. How much clearance do you have with the 2NH calipers? Looking to buy a set of M2 CS Racing wheels as my current track wheels , König Hypergram 18x10" ET 25, didn't clear the new G8X M calipers.

Has enough space