04-12-2023, 09:54 AM | #6251 |
the me
357
Rep 322
Posts |
flybigjet , its the 7000 TL. a bit overkill for the cars, but for the Jeeps and the Truck, nice for the extra capacity.
__________________
01 Z Coupe, 5MT, SB, not much else
08 M3 Coupe, 6MT, JB, not much else 21 M2c Coupe ,DCT, SOM, not much else |
Appreciate
1
flybigjet6923.50 |
04-12-2023, 11:30 PM | #6252 |
Captain
1253
Rep 613
Posts
Drives: F87 M2 CS
Join Date: May 2019
Location: Erie, CO
|
A couple pics I snapped, as I stopped to grab lunch after a fantastic canyon run today.
This weekend I removed the front lip and side blades (for the second time). After a lot of internal back and forth, the verdict is in... I definitely prefer the "lipless" look.
__________________
Current: F87 M2CS - 6MT | Öhlins R&T | Garagistic Endlinks | Autosolutions SSK | AA EL Midpipe & Axleback | 255/275 PS4S
Gone: F87 M2C - 6MT | Öhlins R&T | G.C. Camber Plates | Autosolutions SSK | UCP | AA EL Midpipe & Axleback | Apex EC-7 | 265/295 PS4S |
Appreciate
5
|
04-13-2023, 08:52 AM | #6253 |
Enlisted Member
87
Rep 30
Posts |
Active Autowerks Valved axle-back on. Thanks to Mike @ XPH! Never seen these tips before and they don't seem to be listed on the AA site. I like them. Glad to finally get rid of the eye sore stock box.
|
Appreciate
4
|
04-13-2023, 10:14 AM | #6254 | |
Lieutenant
434
Rep 426
Posts |
Quote:
|
|
Appreciate
0
|
04-13-2023, 10:30 AM | #6255 |
Member
76
Rep 69
Posts |
|
Appreciate
1
rwemersonrw535.00 |
04-13-2023, 10:48 AM | #6256 |
Lieutenant
535
Rep 436
Posts |
|
Appreciate
0
|
04-13-2023, 10:50 AM | #6257 |
Lieutenant
535
Rep 436
Posts |
|
Appreciate
2
Spider.75.50 Daytona_550468.00 |
04-13-2023, 11:18 AM | #6258 |
Enlisted Member
87
Rep 30
Posts |
|
Appreciate
1
rwemersonrw535.00 |
04-14-2023, 10:05 AM | #6260 | |
Remove Before Flight
6924
Rep 1,616
Posts |
Quote:
The only one that seems to be consistent quality is the Sunveer (or however it's spelled)- at least from reading threads on it. TIA-- R.
__________________
Current: M2C, Miata RF-GT, RDX & Element // R1200GS & VRSCF
Previous: M3, Focus ZX3-S2, Superchaged Solara, Samurai, Integra, Pinto & RX-4 // VRSCR, R6S, FZ1 & FZ600 |
|
Appreciate
0
|
04-14-2023, 01:41 PM | #6261 | |
Lieutenant
535
Rep 436
Posts |
Quote:
Quality is great for the most part I mean I’m not beating it with a hammer on a daily basis but it does withstand debris at high speeds very well. And quite frankly I really enjoy how it looks and how it makes the car look. I didn’t purchase the hood for looks or weight saving, I damaged my oem hood and so I had to replace it. So I figured I might as well upgrade it in the process. This is why I replaced it: |
|
Appreciate
0
|
04-14-2023, 03:56 PM | #6262 |
Captain
1870
Rep 987
Posts |
__________________
2020 M2C
2018 M2 LCI Gone 1M, 991.1, 991.2, 718S, 991.2 TT, R8 Spyder RWD |
Appreciate
0
|
04-14-2023, 04:59 PM | #6263 |
Lieutenant
535
Rep 436
Posts |
Haha I was an idiot! I popped my hood to let it cool and as I was getting out I saw that my valve stem broke so I was losing a lot of air so I figured I drive over to the tech which was only a couple hundred feet away and a gust of wind coupled with my driving cause the hood to bend back! Not bright not bright at all. Haha
|
Appreciate
0
|
04-14-2023, 08:54 PM | #6265 |
New Member
8
Rep 23
Posts
Drives: 2020 M2C LBB, 2016 X1 AW
Join Date: Nov 2019
Location: Pa
|
Decided to go to the 763m wheels with MSS springs & 10mm spacers, AA equal length mid pipe with Remus exhaust.
|
Appreciate
4
|
04-15-2023, 01:43 PM | #6266 | |
Captain
1870
Rep 987
Posts |
Quote:
Tuesday I'm having Dinan HAS installed and 763s with 10mm spacers all round (future classics) on LBB...
__________________
2020 M2C
2018 M2 LCI Gone 1M, 991.1, 991.2, 718S, 991.2 TT, R8 Spyder RWD |
|
Appreciate
1
Historicwc7.50 |
04-15-2023, 02:25 PM | #6267 |
New Member
8
Rep 23
Posts
Drives: 2020 M2C LBB, 2016 X1 AW
Join Date: Nov 2019
Location: Pa
|
|
Appreciate
0
|
04-15-2023, 03:34 PM | #6268 |
First Lieutenant
662
Rep 341
Posts
Drives: 2020 M2, 6MT
Join Date: Mar 2019
Location: Roanoke, VA
|
Went and checked out my dealer’s G87. I thought the overall appearance and the Zandvoort blue color were better than I expected. Surprisingly I didn’t think the interior was that much of an upgrade in terms of the seats and materials.
Then I put my summer wheels back on and went for a drive. 😎 |
Appreciate
4
|
04-16-2023, 08:51 AM | #6269 | |
Lieutenant Colonel
1845
Rep 1,614
Posts |
Quote:
The Zandvoort blue looks nice in person for sure. The car looks so much better in person, it really does. Its not f87 good looking and it does look weird but it does not look bad like some of the pictures. The front is freaking wide, its pretty crazy when you look at the hood how wide it is. I am with you on the interior, I like ours better, simple and nice. I do bet the sitting position is better on the g87. The f87 seating position is not great, you sit so damn high. Even the 435 they gave as a loaner you sit nice and low, I can't even sit at the lowest position or I can barely see out the car lol, on f87 at lowest position still too high. The interior looks nicely built but btw the screen and the silvery parts is just ok for me. But BMW will sell a ton of them |
|
Appreciate
0
|
04-17-2023, 12:45 PM | #6270 |
Brigadier General
6138
Rep 3,661
Posts |
purchased the oem m performance front lip and diffuser now that weather is getting nice again.
first owner did the mpe, 763m, side winglets, floating center caps, and spoiler. all port installed on the window sticker ... but for some reason didn't have the lip and diffuser done ? normally i'll do some quality rep stuff, but with so much expensive mpe stuff on the car i couldn't cheap out on it now lol. also purchased some vinyl tints for the rear reflectors. didn't feel the fake vents people do were worth it. now just waiting for it all to arrive
__________________
2018 Porsche GT3 6MT 2021 M2C DCT Previous: Ferrari 458 | R35 GTR | F80 M3 | E46 M3 | E36 M3 | Scion FRS |
Appreciate
6
|
Post Reply |
Bookmarks |
|
|