[Track/S]

Originally Posted by ///Mobbin

Curious if there is a certain amount of camber required to fit the 295/30?

I'll soon be running the Tractive Touring suspension with OE-type springs and Millway Motorsport Street camber plates. Was planning -2 to -2.3 up front as this is a dual purpose car.

My dual purpose setup is -2° front and -1.5° rear.
For small amounts of camber, adjustable arms are required

[Expert@ApexWheels]

Originally Posted by ///Mobbin

Just catching up on this thread and wow, awesome what all has gone into this! Thanks to those who have contributed to the knowledge. Very interested in fitting 18's and running giro-disc replacement rotors as well. Win-win.

ApexWheels any chance the newer APEX ML-10RT's would fit? My preferred option would be 18x10.5 square but 18x10/18x11 staggered could also work for me.

We cannot confirm that changing the rotor size can help fit with our 18" ML-10RT's as we can only verify the OEM configuration of the 2NH calipers. Which unfortunately as we know, will not clear 18's. Unless we can get a scan/template for this setup, there isn't a way we can confirm that at the moment.

- Jasper

[TeeeeeeDub]

Originally Posted by Expert@ApexWheels

We cannot confirm that changing the rotor size can help fit with our 18" ML-10RT's as we can only verify the OEM configuration of the 2NH calipers. Which unfortunately as we know, will not clear 18's. Unless we can get a scan/template for this setup, there isn't a way we can confirm that at the moment.

- Jasper

I'm in SoCal and would be willing to test fit a wheel on the front of my M2C if you're willing to ship one to me to test for you. I have 2NH calipers with Track/S brackets and 380mm Paragon rotors just installed. If interested, please PM me.

[///Mobbin]

Originally Posted by Track/S

My dual purpose setup is -2° front and -1.5° rear.
For small amounts of camber, adjustable arms are required

Thank you for this. Also curious what offsets are working for you to fit 295/30r18 on 10.5x18 wheels?

[Track/S]

Originally Posted by ///Mobbin

Thank you for this. Also curious what offsets are working for you to fit 295/30r18 on 10.5x18 wheels?

Front ET31, rear ET46

[ApexWheels]

Originally Posted by TeeeeeeDub

I'm in SoCal and would be willing to test fit a wheel on the front of my M2C if you're willing to ship one to me to test for you. I have 2NH calipers with Track/S brackets and 380mm Paragon rotors just installed. If interested, please PM me.

That wouldn't be an efficient way to confirm clearances. At best it would give us a single sample against a particular apex wheel. Track/S I've DM'ed you several times asking about a 3D scan file of this kit and haven't ever seen any scan. Any progress on that front?

Once we have a scan of the kit and can build a clearance template for it, We'll be able to check clearance against any of our wheels and design future wheels around the kit rather than rely on an in-person test that confirms data only for a single width, offset, and design.

-Tom

[///Mobbin]

Track/S Thanks for the many answers and insight in this thread.
Many of us will owe you a pack of beer if you can make this scan happen!

[///Mobbin]

Folks, while we wait for other fitments to be confirmed, I'm also curious who has the best pricing on 513M 18x10.5 ET46 wheels? It looks like those are the forged M2 CS racing fitments.

Found some more info on them here - LINK

[Track/S]

Originally Posted by ApexWheels

That wouldn't be an efficient way to confirm clearances. At best it would give us a single sample against a particular apex wheel. Track/S I've DM'ed you several times asking about a 3D scan file of this kit and haven't ever seen any scan. Any progress on that front?

Once we have a scan of the kit and can build a clearance template for it, We'll be able to check clearance against any of our wheels and design future wheels around the kit rather than rely on an in-person test that confirms data only for a single width, offset, and design.

-Tom

Originally Posted by ///Mobbin

Track/S Thanks for the many answers and insight in this thread.
Many of us will owe you a pack of beer if you can make this scan happen!

I will do!

[StixR_]

Hey Track/S i just reading that topic since it's open to follow the thing and i was thinking you was in USA i'm really interessed of this kit since you are in Europe and me too

I just have some question it's for a M3 F80 ringtool and since Belgium don't accept the AP racing at inspection i maybe have to go for F87 2HN

I use Protrackwheel 10.5x18 ET27 front - 11x18 ET44 rear if you can share me someone seeling the kit i will appreciate thanks mate

[Track/S]

Originally Posted by StixR_

Hey Track/S i just reading that topic since it's open to follow the thing and i was thinking you was in USA i'm really interessed of this kit since you are in Europe and me too

I just have some question it's for a M3 F80 ringtool and since Belgium don't accept the AP racing at inspection i maybe have to go for F87 2HN

I use Protrackwheel 10.5x18 ET27 front - 11x18 ET44 rear if you can share me someone seeling the kit i will appreciate thanks mate

Did you write me on whatsapp?

[StixR_]

Originally Posted by Track/S

Did you write me on whatsapp?

Yeah it’s me

[E93M3MW]

Originally Posted by ThreeStripes

18x11 +44 et from apex works like a charm in the rear. I run that and a 18x10 +25 for a spacerless staggered setup and it’s been great.

Any pics with this setup please?

[Track/S]

G8X 380x36mm giros with custom hats to fit on F8X

[medphysdave]

How are you liking the Girodisc vs Paragon? Any notable difference of should we get whichever is the best price?

[D_SheerDrivingPleasure]

Originally Posted by Track/S

G8X 380x36mm giros with custom hats to fit on F8X

Nice job. Anodized?

What hardware are you using to secure the hats and rings?

[Track/S]

Originally Posted by medphysdave

How are you liking the Girodisc vs Paragon? Any notable difference of should we get whichever is the best price?

I would have to analyze a piece of disk from each brand to know which ones are better.

Originally Posted by D_SheerDrivingPleasure

Nice job. Anodized?

What hardware are you using to secure the hats and rings?

Unanodized, there was no time and the customer needed them urgently, I have used Paragon hardware since they were purchased by mistake.

[medphysdave]

Looking to me like the end user should get whichever is more cost effective in their region. I'd still like to see the new Australian groups product to see if it is a contender.

[D_SheerDrivingPleasure]

Originally Posted by Track/S

Unanodized, there was no time and the customer needed them urgently, I have used Paragon hardware since they were purchased by mistake.

You're MacGyver. Google him if you don't know.

[Track/S]

Originally Posted by D_SheerDrivingPleasure

You're MacGyver. Google him if you don't know.

Hahahah

[TeeeeeeDub]

Has anyone fit 18" Volk 21A's over 2NH with these brackets?

[D_SheerDrivingPleasure]

Custom brackets and Ti pistons from Track/S and high temp seals and boots from Racing Brake, Girodisc rotors and Ti shims.

Let's Go!