10-23-2019, 04:59 AM | #199 | |||
Private
105
Rep 65
Posts |
Quote:
Which suspension to use in order to get rid of spacers? |
|||
Appreciate
0
|
10-23-2019, 10:34 AM | #200 |
Captain
356
Rep 718
Posts |
Thanks Champ!!
I am going to order the 22 and know for sure I can get away without running a spacer. I assume you have zero rubbing on the front when you were running 7.5mm spacer. BTW how much are you lowered by. Thanks once again for all you help and input |
Appreciate
0
|
10-23-2019, 10:41 AM | #201 | |
Captain
356
Rep 718
Posts |
Quote:
running camber plates maybe he can chime in and comment. but either you way lower than he is and with a 5mm spacer you at ET 23. can you run the with no spacer and have enough clearance on Strut? |
|
Appreciate
0
|
10-23-2019, 03:33 PM | #202 | |
Private First Class
69
Rep 114
Posts |
Quote:
Mperformance coilovers and tck plates. -3.2 degrees negative camber. No rubbing inside or outside. |
|
Appreciate
1
whoop_ass356.00 |
10-23-2019, 11:29 PM | #203 | |
Captain
356
Rep 718
Posts |
Quote:
Exactly what I have been saying you can get away with going with the ET22 wheel but i think camber plates are a must to clear the fender. Waiting Patiently for Apex to release the EC-7R in 19" hurry up already APEX!! |
|
Appreciate
0
|
10-24-2019, 09:03 AM | #204 |
Private
105
Rep 65
Posts |
Can not, this is causing the issue...
|
Appreciate
0
|
10-24-2019, 11:33 AM | #205 |
Captain
356
Rep 718
Posts |
|
Appreciate
0
|
10-24-2019, 02:35 PM | #206 | |
Private
105
Rep 65
Posts |
Quote:
Hope I will have the perfect clearance because I am rubbing hard on the front right now. |
|
Appreciate
0
|
12-17-2019, 09:48 AM | #208 | |
Food Critic
1086
Rep 1,013
Posts |
Quote:
Also, any pics of folks using these wheels with 255/35 - 275/35 street tires?
__________________
|
|
Appreciate
0
|
12-17-2019, 01:38 PM | #209 | |
BimmerPost Supporting Vendor
3783
Rep 7,080
Posts |
Quote:
We don't have any photos yet of that particular tire combo, but I'd also be prepared to dial in about -2º of front camber to ensure clearance with the spacers added. --Dylan
__________________
925-245-0773 /// info@apexraceparts.com
Wheels /// Accessories /// Vehicle-Specific Fitment Guides /// Careers /// ML-10 Survey |
|
Appreciate
0
|
02-10-2020, 03:36 AM | #210 |
Private First Class
23
Rep 130
Posts |
Planning on running 19 ec-7 with street tyres pss/ps4s. 265/30 front and 285/30 rear. Anyone running this with lowering springs for example H&R 30mm front and 20mm rear?
|
Appreciate
0
|
02-21-2020, 01:57 AM | #211 |
Captain
356
Rep 718
Posts |
ye i don't see a problem as the issue comes with the spring perch of the coilover kits, stock strut has plenty space and with going with a shorter 30 profile tire it fits no problem.
|
Appreciate
0
|
02-27-2020, 12:19 PM | #212 |
Captain
1055
Rep 937
Posts |
|
Appreciate
0
|
05-13-2020, 09:21 PM | #214 |
Lieutenant Colonel
2549
Rep 1,818
Posts |
What suspension are you running here? Any spacers on the front? I'll be running the same wheel/tire setup, most likely with Ohlins. Hoping to avoid needing spacers.
|
Appreciate
0
|
05-16-2020, 05:25 PM | #215 | |
Lieutenant
284
Rep 518
Posts |
Quote:
|
|
Appreciate
1
Montaver2549.00 |
05-19-2020, 08:10 AM | #216 |
Captain
518
Rep 943
Posts |
Updated picture for the wheel reference.
Running 255/275 combo as suggested in the original post for RE-71R. Suspension is M Performance.
__________________
|
05-21-2020, 01:59 AM | #217 |
Private First Class
204
Rep 182
Posts |
Man Apex really dropped the ball on this wheel release from the get go. It should not take 10 pages of posts to decipher what works and what doesnt. First they say camber plates are needed, then they kind of back pedal and say well dont need them. Then you got a whole butt load of people needing to run spacers on these so called M2 specific wheels. This is a joke. If you want to offer a wheel set up that would work on the M2/M2C fine. But don't say as if it its custom built for the M2 when you gotta run camber plates and/or spacers to get things not to rub of suspension components or the actual damn sheetmetal of the car. If you are having issues with the front, offer a half inch narrower wheel with a custom offset that will work without any camber plates or spacers for stock or modestly lowered set ups. I'm suprised no one has the balls to say it like it is.
__________________
2019 M2C Sunset Orange 6MT
Eventuri Intakes Eisenmann Valved Full Exhaust |
Appreciate
0
|
05-21-2020, 08:17 AM | #218 | |
Captain
518
Rep 943
Posts |
Quote:
no issues here with MPerf Suspension running on 255/275 RE-71R. no camber plates. no spacers.
__________________
|
|
Appreciate
1
F80_Katz780.00 |
05-22-2020, 10:44 AM | #219 | |
justanothere90
780
Rep 450
Posts
Drives: 2008 E90 M3
Join Date: Jan 2019
Location: New Jersey
|
Quote:
That being said, the real issue is how available they are. Back ordered with a couple month wait usually turns people off. I'd get another set just for the hell of it if they were in stock. |
|
Appreciate
0
|
05-22-2020, 11:43 AM | #220 | |
Private First Class
122
Rep 141
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|