[IND-Distribution]

The IND Red Start/Stop Button for the F87 M2 is now in stock.

Replaces your factory button and functions just like OEM. Click Here for the Install Guide

Available for purchase on our website or through any IND representative.

IND F87 M2 RED START / STOP BUTTON
https://ind-distribution.com/product?sku=IND-SSRB-F87

Phone: 866-963-4520
Email: Info@ind-distribution.com

[IND-Distribution]

We are now also offering the IND Ignition Bezel.

Available in 3 color options, Silver, Gloss Black and Black Chrome.

[IND-Distribution]

Red Start / Stop Buttons and bezels are in stock.

[alscks0414]

I bought the bezel and the button i replaced the button but i cant find a way to install the bezel... do i glue it on the top of the existing bezel?? Is there an instruction pics posted for the bezel?

[ham_hock_]

Had the same question—theres a (very hard to see) piece of adhesive inside the bezel. Just stick it on!

[IND-Distribution]

Originally Posted by alscks0414

I bought the bezel and the button i replaced the button but i cant find a way to install the bezel... do i glue it on the top of the existing bezel?? Is there an instruction pics posted for the bezel?

Originally Posted by PNK

Had the same question—theres a (very hard to see) piece of adhesive inside the bezel. Just stick it on!

That is correct, there pre-applied thin tape on the back of the bezel. There may be some paint covering it but you should see the red film that covers the tape.

It simply sticks over the factory bezel.

[alscks0414]

Originally Posted by IND-Distribution

That is correct, there pre-applied thin tape on the back of the bezel. There may be some paint covering it but you should see the red film that covers the tape.

It simply sticks over the factory bezel.

Originally Posted by IND-Distribution

That is correct, there pre-applied thin tape on the back of the bezel. There may be some paint covering it but you should see the red film that covers the tape.

It simply sticks over the factory bezel.

I see i will check it more carefully if i have the sticker at the back. Would it actually hold the bezel strongly and will not be falling apart after years of use?

[IND-Distribution]

Originally Posted by alscks0414

I see i will check it more carefully if i have the sticker at the back. Would it actually hold the bezel strongly and will not be falling apart after years of use?

Yes it should, its a snug fit even without the pre-applied tape.

[alscks0414]

Originally Posted by IND-Distribution

Yes it should, its a snug fit even without the pre-applied tape.

Originally Posted by IND-Distribution

That is correct, there pre-applied thin tape on the back of the bezel. There may be some paint covering it but you should see the red film that covers the tape.

It simply sticks over the factory bezel.

Originally Posted by IND-Distribution

Yes it should, its a snug fit even without the pre-applied tape.

Well i did try to put on the original bezel but it does not hold for any second. Guess will try to fit with the tapes removed. I will let u know!

[IND-Distribution]

Install guide for the Start / Stop button. We used our Blue Button for this DIY.

[V10S85]

When are you guys going to release the red button for the E60 M5 Platform? Impatiently waiting!

[IND-Distribution]

Originally Posted by V10S85

When are you guys going to release the red button for the E60 M5 Platform? Impatiently waiting!

We just need someone to bring their E60 in to take a look at.

[V10S85]

Originally Posted by IND-Distribution

We just need someone to bring their E60 in to take a look at.

Can't wait!

[IND-Distribution]

Gloss Black bezel with red button installed

[CTPJ]

How do these compare to BMW OEM? Are they a significant improvement over the cheap ones available on Amazon? I'm looking for something that's as close as possible to OEM look and quality without having to pay $100+ for one from BMW.

Thanks,