Quote:
Originally Posted by MPBK
Quote:
Originally Posted by Poochie
Sorry about the confusion, that post was from last year before I had an opportunity to test the coding on a 2019 230i loaner car.
To confirm, yes, those same parameters does work on all F-Series vehicles with model years 2018 and above, including vehicles with the latest software revision.
|
So, I hooked up Bimmercode to my car today.
On a 2018 LCI M2, I see the
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE
but the
3012 EAH
looks very different. There is no EAH_VERFAHRWEG_SLV_PHYS nor EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS parameters. Instead, there is only a EAH_0_42_255 parameter.
(see picture : https://www.dropbox.com/s/bbli43segu...44.33.png?dl=0 )
If I go inside that parameter, I see 5 other values (including a custom value).
(see picture https://www.dropbox.com/s/tu15w333yk...44.37.png?dl=0 )
What am I missing? Do I need to ask my dealer to update the software?
|
Sorry it didn't work but according to my research, in some vehicles, additionally coding needs to be adjusted in the FEM body.
I linked the thread below of someone who had a similar issue. Good luck and keep us updated.
https://f80.bimmerpost.com/forums/sh...php?p=20937103