08-29-2020, 06:18 AM
|
#44
|
Rear Admiral
Drives: Bavarian Milk Wagon
Join Date: Jun 2012
Location: €
|
Quote:
Originally Posted by Big Fabri
Quote:
Originally Posted by Kankles
Quote:
Originally Posted by Big Fabri
Quote:
Originally Posted by Kankles
Quote:
Originally Posted by Big Fabri
Quote:
Originally Posted by Kankles
Quote:
Originally Posted by Big Fabri
Quote:
Originally Posted by Kankles
On my M2c I'm considering to leave the stock front swaybar and just upgrade the bushings (powerflex). They offer two sizes, 26.5 mm and 28 mm.
Does anyone know what is the appropriate bushing size for the stock bar (which I believe is 24.7mm)? I would assume 26.5 for stock and they offer the 28 for aftermarket but not sure.
Appreciate any feedback my fellow BMW wankers
|
i'm gonna measure them tomorrow and i will let you know
|
Thanks Fabri
|
Sorry I forgot 🤦🏻*♂️
Front is 24.7mm,the rear is 23mm
|
No worries, thanks! Hope lot the 26.5 bushings work as they're in the post now
|
26.5 is pretty big..too big
|
The diameter where the bushing/bracket mounts seems to be thicker. The 26.5 size from powerflex was a perfect fit. Installed today
|
Perfect!
|
|
|
|