Here is 2nd to 3rd to 4th log from earlier in the week when I was first testing a new map from
proTUNING Freaks. At this point I was shifting at my normal speed of about 1.4 seconds. Same map as my previous post, the only difference being shift speed:
https://www.bootmod3.net/log?id=5e7a...0b43508e6fe7fd
This time, the waste gate doesn't close fully for some period after I'm back on the pedal.
In the log shown above, the delay between pedal going to 100% and waste gate going to 100% is 0.8 seconds for the 2nd to 3rd shift, and 0.7 in the 3rd to 4th shift. The duration between pedal going to 0% for the start of the shift and the waste gate going to 100% is 1.8 seconds for both shifts.
Interestingly, I've gone through all 16 logs that I took with this latest map, and the duration between first lifting the pedal to make the shift and the waste gate going back into controlling boost (which usually means closing) is consistently ~1.8 seconds!
__________________
2018 ///M2 LCI, LBB, 6MT...
Current Performance Mods:
CSF FMIC, ER CP, Fabspeed Cat, Aquamist WMI, GFB DV+, NGK 97506, BM3 (Stage 2 93 OTS), CDV delete, UCP, M2C/M3/M4 Strut Brace, M3/M4 Reinforcement Rings