Quote:
Originally Posted by Robban
I did try out 10 mm spacers on the rear wheels.
Mine is lowered with Mperformance coilovers.
10 mm is in my opinion too much. 5 mm would be perfect.
I left it as standard for the time being and its almost flush.
I have also read that a few members have up to 15 mm......the wheel sticks out already with the 10 mm.
For the front wheels I did not try. You will need a spacer with centre hub and therefore you will end up with 10 mm. 10 mm is to much what I could see.
Hope this info is usable for some.
Cheers
|
I put my 19x10 et 34 Works on the back, I wouldn't want to go any further than that. 5-6mm is perfect like you said. The front looks like it will be the same, 5-6mm for flush.