Quote:
Originally Posted by peyotepaul
This was very concise and helpful guide to coding GTS Steering & MDM.
First, I updated the DSC, EPS, and GHAS ECUs to the latest via PSDz v4.40.11. No issues with DSC and EPS. GHAS gave me a timeout error for certain modules but still seemed to flash correctly.
I was able to FDL code DSC and EPS to the GTS settings but I am not able to code GHAS for some reason. I believe I may have flashed too new of an ECU.
This is the error message I'm getting:
[] SVK-Ist does not match expected SGBMIDs for ecu ECUId:GHAS_0x0F. Excpected (relevant process classes only): [hwel_000007c1-003_001_001, btld_00001056-012_001_000, swfl_00001062-017_000_000, swfl_00001063-017_000_000], Actual (relevant process classes only): [hwel_000007c1-003_001_001, btld_00001056-012_001_000, swfl_00001062-019_000_000, swfl_00001063-019_000_000], Missing SGBMID(s): [swfl_00001062-017_000_000, swfl_00001063-017_000_000], Surplus SGBMID(s): [swfl_00001062-019_000_000, swfl_00001063-019_000_000] [THROWABLE]
[GHAS - F] There was an error during TAL execution, please check the log files. [WARN]
[GHAS - F] - [Exception - GHAS - f] SVK-Ist does not match expected SGBMIDs for ecu ECUId:GHAS_0x0F. Excpected (relevant process classes only): [hwel_000007c1-003_001_001, btld_00001056-012_001_000, swfl_00001062-017_000_000, swfl_00001063-017_000_000], Actual (relevant process classes only): [hwel_000007c1-003_001_001, btld_00001056-012_001_000, swfl_00001062-019_000_000, swfl_00001063-019_000_000], Missing SGBMID(s): [swfl_00001062-017_000_000, swfl_00001063-017_000_000], Surplus SGBMID(s): [swfl_00001062-019_000_000, swfl_00001063-019_000_000]
Is there any way for me to revert GHAS back to an older iStep? If i just changed Target to an older verison?
|
If the SVT ist and soll have blue and red HWEL then it will bring this error. Make sure the HWEL is black. After calculating svt soll press HWID from SVT actual the the HWEL will be black. The calculate svt tal.