Quote:
Originally Posted by UltraMagneticAL
I'm pretty sure the factory mounting points are good enough in the back. the front is not thick, reinforced steel, and the rear is basically designed the same way, but with three holes. the lower control arm is the same arm the spring sits on, so that definitely will be okay.
|
Yes - front can be re-inforced with oem M3/M4 strut top "rings"[part # 31302285700 &01].
Rear - I'd be curious if lower m12 mount bolt [part # 07119905610] is man enough to cope with additional loads...