[Endeav]

Originally Posted by specka

I dont know if its been explained already, I searched the thread for 'TMAP' and there's no results, but what is the TMAP Pre-Thottle setting for?

I have posted the unsatisfactory results I've had with the tune (total loss of response from 1500-2000rpm in all gears) and reverted to stock, I'm wondering if there is another setting such as the above that might help.

Thanks

Originally Posted by Sure_3

I have the same question.. I can only find one TMAP Sensor online...

https://www.bimmerworld.com/BMW-Pres...627843531.html

Do you know some Pre-Throttle Tmap sensor?

Thank you

Just to loop you two into the response...

Originally Posted by Anthony1s

I think Endeav would know for sure. As far as I can tell, only the TMAP sensor you have linked is needed when running higher than ~20psi.

Anthony1s you're correct. Leave those settings regarding the TMAP sensors as "OEM" unless you're running greater than 20 PSI and have the N20 TMAP installed.

Running more than 20 PSI on the OEM turbo and expecting it to last an extended period of time is probably not a good mix