|
For the front it was a bit more difficult and took longer.
I used different items from Revotec.
Installed 2 pieces of ducting mount on each side to hold the flexible duct which has 57 mm inner diameter.
Installed outlet ducts on the dust plate. I used 4 rivets on each side. I removed portion of the dust plate to provide airflow.
On the duct routing i'm trying two version, i'll see which one works better. It's possible that the moving parts will rub the duct.
My other concern is the ground clearance as you can see on the last picture. If it's too low then maybe i will order the BPE bottom plate or i'll find an inner routing from the front grill.
|