Quote:
Originally Posted by Tresbien
Just ordered EC-7s 18x9.5 ET35 for a square setup w 265mm tires. Will 10mm (or even 12mm) spacers work on all four corner w H&R lowering springs without rubbing?
Pre-LCI M2, so fenders are not rolled.
Not running camber plates.
Thanks in advance!
|
Not sure how we missed this question, but we would not recommend 10mm spacers on any of our fitments. 12mm spacers can work in certain situations, but would not be my first choice here. These wheels should be a direct fit in the rear without any spacers though you could run a 5mm if you wanted without any rubbing issues. In the front, you will likely need at least 5mm spacers.
Apologies for the delayed response! I assume that you've solved the problem at this point so I would be curious what solution you went with to run this setup!
Thanks
-Tom