Quote:
Originally Posted by VisualEcho
Let me explain it better this way.
These specs are flush for the front, 19's or 20's:
19 x 9 +17
19 x 9.5 +23
19 x 10 +30
These specs are flush for the rear, 19's or 20's:
19 x 10 +30
19 x 10.5 +36
19 x 11 +43
The only difference is the tires. When you go to 20's, because of the way they fit, you can usually fit a bit wider tire. So if a 285 is an easy fit on a 19, a 295 is usually an easy fit on a 20. And this is simply down to the smaller sidewall and how it's stretched over the wheel.
|
Hello,
Im thinking of doing the following setup and want some help to make sure the front and rear offsets match to achieve a flushed look.
BC forged HCA383S 2 piece wheel
19x9.5 et22 with 265/30/19 front
19x11 et40 with 295/30/19 rear
Im going to lower the car on Ohlins R&T coilovers.
Your feedback is highly appreciated guys, thank you !