Quote:
Originally Posted by Sam-R
Think I ran a 3mm spacer to start with but need a 10mm spacer with chubby cup 2 connect tyres.
Like to have as much shock clearance as possible as not something you want making contact under extreme load.
|
Cheers Sam.
My combo is a little different with B16's/millway camber plates and 18x10 et20 upfront. Couldn't source cup 2 connects in the sizes I wanted at the time so just making do with ns2-r as stop gap.
Overall poke should be very close to your 9.5 et25 with 10mm spacer however clearance will be less between the wheel and coilover. I'm pretty sure the b16's have better clearance than the clubsports so we will see.
Thanks for your help ����