OK andrewc89, I can confirm that for LCI M2s with adaptive LED headlights, this doesn't work.
The first part, coding of the button, does work, and I get the light on the dash to signal front fogs are on. What doesn't work, is coding "mapping_nebelschw_l_output: 0x30 /
mapping_nebelschw_r_output: 0x31.
There probably is a coding version that does work, but 0x30 and 0x31 do not unfortunately.
Where did you get 0x30 and 0x31 from andrewc89? Perhaps that would give me a pointer to where to look / try.
Oh... one other thing... When I pulled the button, it was illuminated underneath. The rear fog doesn't have an LED, but the front one does, even though there is only a blanking plate above it.
__________________
2018 ///M2 LCI, LBB, 6MT...
Current Performance Mods:
CSF FMIC, ER CP, Fabspeed Cat, Aquamist WMI, GFB DV+, NGK 97506, BM3 (Stage 2 93 OTS), CDV delete, UCP, M2C/M3/M4 Strut Brace, M3/M4 Reinforcement Rings
Last edited by Nezil; 09-15-2019 at 09:25 PM..
|