View Single Post
      03-05-2020, 01:55 PM   #60
M Fifty
Captain
341
Rep
878
Posts

Drives: M2 & 330CI
Join Date: May 2018
Location: The Interweb

iTrader: (0)

Generally speaking, once you've got the shaft seated properly using the nut (when you might have to use an Allen Ket to hold the shaft still), the final torque setting just needs a socket spanner on the nut and a torque wrench.

Last edited by M Fifty; 05-02-2020 at 01:29 PM..