|
Good afternoon everyone,
We are so happy to see such excitement and enthusiasm for this new sound development for the M2C! We are jumping back in this thread to articulate how to get the tips to fit flush to the diffuser.
As everyones tip fitment preference is slightly difference we aim this response at those who want the tips to be nice and flush with a staggered setup. Here is how you do it:
This work can be preformed by you or your installer. We always recommend processional installation but it can be done in your garage pretty easily as well
On both of the outlets before attaching the y pipes. Remove 1 1/2 inches of material. This removal will allow the Y pipe to slip on deeper and thus bringing the tips back in towards the diffuser once mounted. Please review the pictures to visualize.
For those who have already done this modification and gotten their tips perfect, they have also found that 1 1/2 inches to be perfect. This still allows lots of material for the Y pipe to clamp on. There is no need to weld.
*Doing this will not void the warranty on the system. Do this modification with confidence*
Future units will not have this issue. Thank you everyone for your support. Please reach out if you have any further questions. We are here to help!
|