View Single Post
      10-17-2020, 11:10 AM   #29
iBrakeLate
Private
92
Rep
76
Posts

Drives: 2020 M2 Competition
Join Date: Dec 2019
Location: Miami

iTrader: (0)

More updates on this, with the new settings that Ohlins recommended the car is a bit better but as the tires wear, still running into similar issues, just not as bad. After spending another day at the track trying to get a feel as to what is going on and what to do, I was lucky enough to have a pro driver who has a lot of experience give me his thoughts.

The main issue he noted is that the spring rates that Ohlins supplies with this kit is way too stiff, 90N/mm front (~513 lbs/in) and 190 N/mm rear ( ~1084 lbs/in).

Just ordered 70N/mm front (~399.71 lbs/in) and 120 N/mm (685.21 lbs/in) springs.

Also will be switching up the tires too, the A052's sidewalls are too soft, going to try the Nankang AR1's.

I will update this thread once I have some more information, might be useful for those who track their M2C and want to have an idea of a better setup to run than out of the box stuff Ohlins offers.
Appreciate 0