Quote:
Originally Posted by mjsaville
Space is very tight and I have the smallest hands in the world. I think going in from above with the trim removed should make things easier for sure.
MJ
|
I was finally able to do it without removing the trim. I got more free space by pulling the connector wires above the ICM module. Disassembling the socket was then easy.
Then I had to reinsert the socket into the module. It is a lot easier if you put some wood pieces below the socket entry point of the ICM module. Having a flat and levelled surface, it is easy to slide the socket back into place and secure it with the latch. Remove the wood pieces afterwards.