Quote:
Originally Posted by andrewc89
BIMMERCODE
Coding for 8S4 (VLD):
Front Electronic Module > Expert Mode >
3073 LaMaster1 > LUT_FLC_FORWARDLIGHTING_Y > 9C,9C,9C (Both)
3073 LaMaster1 > C_AFS_ENA > Enable (Both)
Coding for 5AP (GFHB):
Front Electronic Module > Expert Mode >
3073 LaMaster1 > C_HBA_ENA > Enable (Both)
3073 LaMaster1 > C_HBA_GRHB_ENA > Highway_Standby_AFS
3073 LaMaster1 > C_HBA_ADAPT_SHUT_ENA > Enable
Note: You'll see two blue check marks next to some of these. Press the top one. It will uncheck the one below it. Now you can enable one of the two 'enable' options (if there are two). Back out. Go back in. Both correct selections should have the blue check mark next to them.
|
Performed this changes using bimmer codes on
Type 428I (USA)
Series F36 (4 Series)
S552A Adaptive LED Headlight
S5ACA Highbeam Assistant
S5APA Decode Antiglare FLA Highbeam Assist
S544A Cruise Control With Brake Function
S563A Light Package
lamps.
LED AFS ADAPTIVE HEADLIGHT LAMP 7460623-01
LED AFS ADAPTIVE HEADLIGHT LAMP 7460624-01
result.
- Still Have to press the button for automatic high beam
- BOTH ON - on dark roads.
- DRIVER side OFF when upcoming car is present on left lane
- No car on LEFT on on front. passenger Beam is on
- At times both high beam are on without any tunneling for car on front.
is this the expected outcome?