Quote:
Originally Posted by V.Smurf
Hi All,
Hope this helps!
Cheers,
|
Nice write up, this is the proper way to hook up a battery tender to our cars. We have an IBS sensor on the negative battery pole on the battery, when it's hook up to the battery directly it's bypassing that IBS sensor which is not good.
The IBS contains a micro-processor that is used to monitor/measure various battery conditions such as:
Terminal voltage via measurement from B+ to Gnd
Charge/discharge current via integrated shunt resistor
Temperature of battery acid via integrated temp sensor
so you want that to be in the loop.