Quote:
Originally Posted by Detroit M
Thanks a lot, that will be a huge help! I also came across the spreadsheet from Nezil which was very well done!
I did not install an additional fuel filter, only the lines from Fuel-It! with some modifications because the XDI-35 fuel pump does not have the correct fitting to receive the Fuel-It! cam-lock. Can you advise about the fuel filter?
|
Most likely it will have to be spliced in because the fuel filter is AN based, unless two things occurs:
1) Adapters that fit the fuel it line to AN is found
2) The fuel line is cut a bit shorter since it will be too long with the fuel filter in place
Otherwise the most likely situation is to cut the fuel line, which is why I don't like the fuel-it line. stainless steel AN lines are much better imo, mainly due to their ability to be easily worked on and to add additional things.
Also I recommend a fuel filter holder so it doesn't sit hanging off of the fuel line.