Quote:
Originally Posted by wanofakind01
Quote:
Originally Posted by cntzl
Quote:
Originally Posted by Megator
Quote:
Originally Posted by cntzl
Apex wheels quickly became my favorite too when I started tracking my M4. I used to run satin black EC-7 18x10" and 18x11" staggered setup on the M4 and now I'm running satun black EC-7 18x9.5" square setup with 275/35/18 NT01s on the M2C. I'm pretty happy with the setup so far  |
Any suspension work to fit that square setup? and what ET did you choose? |
They are ET35 so front requires 12mm or bigger spacers. I run -3 front and -2 rear camber. Also, the car is slightly lowered on Ohlins. |
Any photos of your setup? And which 12mm spacer did you end up going with? Have a similar setup with 265/35/18 with toyo r888r and a 5mm spacer is not enough. |
I posted couple pics on the first page of this thread. I'm running 15mm spacers from Turner but their 12.5mm would work fine too (I checked the clearance with 10mm spacers and Ohlins but there was maybe 2-3mm gap at most with -3degree camber). I chose 15mm spacers because I like more flush look since I have significant negative front camber.