Quote:
Originally Posted by drewdq
They look pretty good, and don't stick out very much at all.
I ended up fixing the wheel rub issue by using a heat gun to meld the inner plastic fender guard/liner back enough to clear the wheel.
1) Removed wheel
2) Heated up the inner plastic liner around the spot the tire rubbed, and much of the larger surrounding area
3) Pressed the plastic guard outward from the center of the wheel hub to make more clearance
4) While holding, sprayed with cold water to set the plastic in place
5) No more tire rub
|
I'll have to try this. I have the same tires only mine are mounted in the stock rims. I only noticed rubbing issues when in very low speed parking lot maneuvers. Now that you've pointed out where the run is happening I'm gonna go inspect my fender liners and see if there obvious damage.