Quote:
Originally Posted by Saanen
This is awesome...I used 91% rubbing alcohol soaked into a paper towel cut to fit over the stickers, re saturated a few times so the paper was soaked for 10+ minutes, then the stickers literally peeled off in one piece!!!
Then cleaned up the edges which had a little residual glue with my fingernail. Then cleaned and freshened it up with a little Armor All and re installed....20 minutes in all.
A few tips, one is pry the plastic tab from the "inside"/medial aspect (ie the edge facing toward the middle of the car) as it is hinged...once it is open it is super easy to unscrew with a torx and slide the electrical connection apart.
I used the pry bar I got from IND when I ordered my black chrome set.
https://ind-distribution.com/product?sku=IND-IK
Now onto the ASD harness!!!! |
I was surprised no one had tried the rubbing alcohol tip prior. Happy to hear it worked for you.