|
Photo gallery 3:
Photo 1: The roof liner is cleaned and the edges of the roof as well to make sure the carbon roof can go in.
Photo 2: Special colored anti-rust material is used to cover the drilled holes.
Photo 3: Both on the car and on the roof glue is fitted. It is important that the roof is put in place under tension.
Photo 4: All four screws go back in place and the roof is clamped into place for the next 12 hours.
Photo 5: The front windscreen went into the car the next morning.
Photo 6: All other parts were placed back into the car accordingly.
Photo 7 to 10: All ready, now let's wait until I can drive it.
|