Easy job! Most annoying was the plastic hanger on the left. That thing did not want to come out. Other than that all fine and easy.
I added one modification for myself. I put some pluckfoam between the harness and the bodywork, and between the harness and the plastic black cover that goes over the amp and the ASD module since all could be touching each other while driving and that is something I would like to hear since it is no silent inside :P
Some photos below... I will be driving later and I will let you know my feedback. I decided not to film it since it is so hard to hear the difference on a camera microphone. I hope I will be able to share my thoughts in words with you after driving.
MR
|