Edit: Disregard, I'm an idiot.
Hey guys, I recently put in a set of KW v3 coilovers on my M2C and have been in the process of dialing in the ride height. One thing I noticed was that the rear drop has not correlated at all to the specs that KW provides in their instructions.
For example, they mention the rear measurement on the adjustment thread (see below) to be between 15mm-35mm (which would be 1.8"-0.8" drop, respectively)
I set it at the lowest setting (15mm) assuming I would get a 1.8" drop, however I only saw ~0.85". Went from 14.1" wheel hub to fender distance to about 13.25".
The fronts I've had no issues with & everything seems to be in-line with the specs in the instructions.
Wondering if anyone else here ran into this same problem with their KWs? Not sure what I can do to go lower for the rears at this point.