Quote:
Originally Posted by VisualEcho
10mm of stock travel seems to be an impossibly small amount of tolerance to me.
|
It's 10mm of travel to contact with the bumpstop, from there you add whatever compression of the bumpstop allows but of course resistance increases as it compresses until you eventually bottom out.
This is info I was given by a guy who has had custom coilovers made for his M2C. Have to say it's not inconsistent with some of the violent rebound I get on our country roads. I'm installing some Ohlins R&T in a few weeks so before I remove the oem I'll mark the stock ride height on the shock & verify travel to the bumpstop.