Quote:
Originally Posted by squixs
I fixed the rattle on my MPE with:
- Unscrew tips
- Use a rubber hammer to make sure they're as far back as possible
- Screw tips tighter than stock spec
I've seen somewhere that someone uses some sort of tape between the exhaust and the tips, that could also help.
|
Pretty much what my conclusion was.
Problem is, that the solution above can lead to tips sticking out differently from left to right, see my post:
https://f87.bimmerpost.com/forums/sh...5&postcount=82
Still absolutely love it, but the metallic rattle is annoying during the cold start, just sounds "wrong".