Quote:
Originally Posted by Daytona_550
Sorry for the delayed reply (hadn't had a chance to troubleshoot this until yesterday). So, in addition to your formula, I tried the following:
A=
=A
=A-40
-40=A
All unsuccessful.
I know the coolant data point is available from the ECU because I can see it through another "Car Scanner" app, and also on TrackAddict, but for some reason, not coming up on Harry's. I will post the issue on Harry's LapTimer forum to see if anyone can shed some light.
|
I have a couple more things you can try.
In Torque Pro you have to set the mode and PID in the same line, so for coolant I enter "0105" for mode 1, PID 05. I didn't think you'd need to enter the leading 01 because you have a separate field for mode.
The next thing you can try is PID "5205". I saw a doc that said that's the internal address for the coolant sensor that's supposed to get passed onto the "05" generic PID. Not sure of those will work for you, but worth a try.