Quote:
Originally Posted by F8SEVEN
Quote:
Originally Posted by omasou
- M Logo tailpipe finishers
- M Performance carbon fiber tailpipe finishers, M2 vs M2C
- M Performance carbon fiber tailpipe finishers-inboard end, M2 vs M2C
- M Performance carbon fiber tailpipe finishers-outboard end, M2 vs M2C
- M Performance carbon fiber tailpipe finisher OD, M2
- M Performance carbon fiber tailpipe finisher OD, M2C
- M Performance carbon fiber tailpipe finishers, M2 & M2C, same OD
The first picture shows the M Performance carbon fiber tailpipe finishers for the M2 and M2C and a chrome ///M logo tailpipe finisher. They all have the same inner pipe OD. The chrome version is < $100 each. I have seen another chrome version w/o the outboard flare but do not have pictures or information on fitment.
The M Performance carbon fiber tailpipe finishers for the M2 and M2C should work on either exhaust.
The M Performance titanium tailpipe finishers for the M2 should work on the M2C performance exhaust.
|
omasou Do you still happen to have the M2C tip sitting around...PN 18302456072? If so, could you measure the diameter of the clamp part...just a tad wider than the part you already measured. This part seems to cross reference with the M5C and may actually be designed for a 70MM pipe vs. the 67MM of the OGM2/M3/M4 MPE. if that's the case, it would fit on the stock pipes for the M2C/M3/M4.
Thx!
|
That picture was taken by Brian before he retired from Sun Motors