Quote:
Originally Posted by iBrakeLate
Has anyone ran 265/35/19 and 295/30/19 setup with Öhlins R&T and GC camber plates on the stickier track rubber? Just want to see if that sizing works without rubbing and what the offsets they used were. Finally if they used spacers or not at all.
|
I believe I read the front 35 aspect ratio will rub on the R&T and others due to dropped height due and the front conical spring design. Spacers will probably fix the spring rub issue but I'm not certain if the 265/35will ultimately avoid rubbing the liner. Obviously greater amount of negative camber you dial will help.