[omasou]

This was the first thing, I did after taking delivery to keep the prep down to a minimum.

Using detroitm2's format...

1. Detail - dealer
2. Drive home
3. Wash
4. Inspected for trash and scratches, didn't need to clay or polish
5. GYEON Q2M Iron Remover (De-iron step)
6. GYEON Q2M Prep (IPA step)
7. GYEON Q2 Pure
7a. Coat the rear diffuser give's it a nice matte sheen and keeps it looking nice and clean.
8. Let dry for 3-4 days- 1-2 days should be more than enough time.

Prior to delivery, I purchased a set of 763M rims and from the box, I used...
1. GYEON Q2M Prep (IPA step)
2. GYEON Q2 Rim

Neither was difficult. Rims were tedious. Wear a mask!

Since these both worked so well, I also applied GYEON Q2 View to the windows. It doesn't appear to be any better than RainX. Knowing what I know now, I would not apply it to the windshield b/c bugs don't come off easily with the wiper fluid and wipers and the windshield gets spotty until I was the car and then they come off very easily.