Quote:
Originally Posted by SEAT TIME RULES
One more question...how much Rear Neg camber were you all able to get with the OEM setup?
I think I was told I could only get around 2.0?
If I have to go aftermarket for a kit that can add more Neg rear All I see is SPL which is like $800 bucks!
Any other less expensive routes?
TIA,
HAZMAT
|
20mm lowered with shims I can get more than 2* in the rear however with the stock toe adjustment range there is not enough adjustment to bring it back to about 2-3mm total toe in. At 2.2* it is about 4mm total toe.
So what I'm saying is if you are replacing with SPL RUA's you will probably need the SPL toe arms as well.