Quote:
Originally Posted by eeyang92
Is there a possibility that the spring clip can fall out? I've had my sensors ziptied for like the last 20k miles and they're still there...
|
Yes 100% its in there pretty loosely. Not a big deal if you don't plan on using them. Lucky you that it stuck around
I taped mine just in case as you need to buy the whole cable for $$$ if you loose it.
@m7ammed Never work on just a jack! Having said that I do it all the time but only to do wheels and pads, never ever if I am sticking my head under there. Throw a wheel under the car so that it catches the car if the jack were to fail. Better a damaged wheel than frame/suspension.
You didnt link to the punch tool. But this is what you need
https://www.amazon.co.uk/dp/B0751HCH..._t1_B003TO2JYY
I think 8mm was wrong and it is more like 4. I am doing pads tonight and will get back to you.
Torque wrench is fine but you will want an extension and/or deep 17mm socket for the bolts.
Something like this
https://www.amazon.co.uk/Laser-3701-.../dp/B003AMZNIY
Also this is nice as your jack has no rubber pad
https://www.amazon.co.uk/DEDC-Slotte...omotive&sr=1-1