Quote:
Originally Posted by cntzl
I'm trying to decide what spec 18" wheels to get for track but it's turning out to be a harder decision than I thought due to the stuff I've been reading. Here's my setup:
- Ohlins RT with GC camber plates
- NT01 275/35/18 square
- I currently have 7.5mm and 10mm Turner spacers but I can get another set if a different size is needed.
I want to be able to run this 275 square setup without any rubbing or issues. I have read 275 on 9.5 wide wheels might have sidewall flex issues which I would want to avoid. I was planning to get Apex EC-7 18x10 ET33 but Apex told me it's not recommended due to having to run large spacers up front (not sure how large). I'd really appreciate if anyone who has a similar setup can share their experience and feedback.
|
I've been running NT01 in 275 square on 18x10 ET 33 with a 12mm spacer up front on Bilstein lowered suspension and 3.2 neg camber. No rubbing.